Toyota LAND CRUISER PRADO Owner's Manual page 302

■ Operation of the engine switch
If the switch is not pressed shortly and firmly, the engine switch mode may
●
not change or the engine may not start.
If attempting to restart the engine immediately after turning the engine
●
switch off, the engine may not start in some cases. After turning the engine
off, please wait a few seconds before restarting the engine.
Electronic key battery depletion
■
P. 135
■ Conditions affecting operation
P. 189
Note for the entry function
■
P. 190
If the engine does not start
■
● The engine immobilizer system may not have been deactivated. (P. 88)
Contact your Toyota dealer.
Vehicles with an automatic transmission only:
●
Check that the shift lever is securely set in P. The engine may not start if the
shift lever is displaced out of P.
Vehicles with the multi-information display type A: The smart entry & start
system indicator light (green) will flash quickly.
Vehicles with the multi-information display type B: A message will be dis-
played on the multi-information display.
■ Steering lock
After turning the engine switch off and opening and closing the doors, the
steering wheel will be locked due to the steering lock function. Operating the
engine switch again automatically cancels the steering lock.
■ When the steering lock cannot be released

Vehicles with the multi-information display type A
The smart entry & start system indicator light (green) will flash quickly.
Automatic transmission: Check that the
shift lever is set in P. Press the engine
switch while turning the steering wheel left
and right.
Manual transmission: Press the engine
switch while turning the steering wheel left
and right.
LC150_OM_OM60R93E_(GE)
4-2. Driving procedures
301
4