Toyota LAND CRUISER PRADO Owner's Manual page 464

Multi-information display
1
The BSM function/RCTA function can be turned on/off. (P. 463)
The RCTA function is available when the BSM function is on.
Outside rear view mirror indicator
2
BSM function:
When a vehicle is detected in the blind spot, the outside rear view mirror
indicator comes on while the turn signal lever is not operated. If the turn
signal lever is operated toward the detected side, the outside rear view
mirror indicator flashes.
RCTA function:
When a vehicle approaching from the right or left rear of the vehicle is
detected, the outside rear view mirror indicators flash.
"BSM" indicator
3
When the BSM function is turned on, the indicator illuminates
RCTA buzzer (RCTA function only)
4
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, a buzzer will sound. The buzzer also sounds for approximately 1
second immediately after the BSM function is operated to turn the system
on.
Turning the BSM function on/off
Use the meter control switches to select
1
tion display.
Choose "
2
Choose "BSM" using
3
LC150_OM_OM60R93E_(GE)
4-5. Using the driving support systems
BSM" using , and then press
, and then press
463
on the multi-informa-
.
.
4