■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (P. 700)
●
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting the wiring harness from damage.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than indicated, or use any
●
other object in place of a fuse.
●
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
NOTICE
■
Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer as soon as possible.
LC150_OM_OM60R93E_(GE)
7-3. Do-it-yourself maintenance
699
7