Toyota LAND CRUISER PRADO Owner's Manual page 110

* 1
: These lights turn on when the engine switch is turned to the "ON" position
(vehicles without a smart entry & start system) or the engine switch is
turned to IGNITION ON mode (vehicles with a smart entry & start system)
to indicate that a system check is being performed. They will turn off after
the engine is started, or after a few seconds. There may be a malfunction
in a system if a light does not turn on, or if the lights do not turn off. Have
the vehicle inspected by your Toyota dealer.
*
2
: Refer to the "Off-road Driving Owner's Manual"
* 3
: The light turns on when the system is turned off.
* 4
: In order to confirm operation, the BSM outside rear view mirror indicators
illuminate in the following situations:
• When the engine switch is turned to the "ON" position (vehicles without a
smart entry & start system) or IGNITION ON mode (vehicles with a smart
entry & start system) while the system is set to ON.
• When the system is set to ON while the engine switch is in the "ON" posi-
tion (vehicles without a smart entry & start system) or IGNITION ON
mode (vehicles with a smart entry & start system).
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction with the system. If this occurs, have
the vehicle inspected by your Toyota dealer.
* 5
: This light illuminates on the outside rear view mirrors.
*
6
: This light illuminates on the center panel.
* 7
: Vehicles with the multi-information display type B: This light illuminates on
the multi-information display.
LC150_OM_OM60R93E_(GE)
2. Instrument cluster
109
2