Toyota LAND CRUISER PRADO Owner's Manual page 370

Changing settings of the pre-crash safety system
Enabling/disabling the pre-crash safety system
■
The pre-crash safety system can be enabled/disabled on
(P. 125) of the multi-information display.
The system is automatically enabled each time the engine switch is
turned to IGNITION ON mode.
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
Changing the pre-crash warning timing
■
The pre-crash warning timing can be changed on
the multi-information display.
The operation timing setting is retained when the engine switch is
turned off.
Far
1
The warning will begin to oper-
ate earlier than with the default
timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to oper-
ate later than with the default
timing.
LC150_OM_OM60R93E_(GE)
4-5. Using the driving support systems
369
4
(P. 125) of