Engine (Ignition) Switch (Vehicles Without A; Entry & Start System) - Toyota LAND CRUISER PRADO Owner's Manual

Engine (ignition) switch (vehicles without a

smart entry & start system)
Starting the engine
 Automatic transmission (gasoline engine)
Check that the parking brake is set.
1
Check that the shift lever is set in P.
2
Firmly depress the brake pedal.
3
Turn the engine switch to the "START" position to start the engine.
4
 Automatic transmission (diesel engine)
Check that the parking brake is set.
1
Check that the shift lever is set in P.
2
Firmly depress the brake pedal.
3
Turn the engine switch to the "ON" position.
4
The
If the engine coolant temperature is above approximately 30°C (86°F), the
indicator may not turn on.
After the
5
engine switch to the "START" position to start the engine.
LC150_OM_OM60R93E_(GE)
indicator turns on.
indicator light goes out or does not turn on, turn the
4-2. Driving procedures
291
4