DPF system failure warning
● If the DPF system warning light comes on (vehicles with the multi-
information display type A) or the DPF system warning message
"DPF full Manual regeneration required See owner's manual"
appears on the display (vehicles with the multi-information display
type B), follow the procedure below to regenerate.
Stop the vehicle in a safe place.
1
Shift the shift lever to P (automatic transmission) or N (manual
2
transmission), and firmly set the parking brake.
Do not stop the engine.
Also, make sure that there are no flammable materials near the exhaust
pipe. (P. 322)
Check the engine is warmed up. If the engine is cold, warm up the engine
by depressing the accelerator pedal.
Press the DPF system switch.
3
Vehicles with the multi-information display type A
The DPF system warning light
will change from solid to slow
flashing, and the idling engine
speed will increase.
Vehicles with the multi-information display type B
The DPF system warning mes-
sage shown in the illustration
appears on the display, and the
idling
increase.
Regeneration will take around 30 - 40 minutes to complete.
LC150_OM_OM60R93E_(GE)
engine
speed
will
4-2. Driving procedures
*
1
319
4
2
*