1-4-5. HC-51 Board
1. Remove the cabinet. (Refer to Section 1-3.)
2. Remove the TILT block. (Refer to Section 1-4-3.)
3. Disconnect the harness and flexible flat cable from the connectors (CN5001 and CN5701) on the
HC-51 board.
4. Remove the four screws, then remove the HC-51 board.
PSW2.6
6
CN5001
Harness
HC-51 board
Flexible flat cable
CN5701
5. To install, reverse the removal procedure.
1-13 (E)
SNC-WR632C/WR602C