1-4-2. IF-1232 Board
1. Remove the top sunshade assembly. (Refer to Section 1-3-1.)
2. Remove the top unit assembly. (Refer to steps 2 and 3 in Section 1-3-3.)
3. Remove the three screws (PSW2.6 x 6), then remove the top plate.
4. Disconnect the two flexible flat cables from the connectors (CN703 and CN704) on the IF-1232
board.
5. Remove the two step screws, then remove the IF-1232 board.
6. Disconnect the harness from the connector (CN702) on the IF-1232 board.
PSW2.6
6
Top plate
Flexible flat cables
Step screws
CN703
IF-1232 board
CN702
CN704
Harness
7. To install, reverse the removal procedure.
1-9 (E)
SNC-WR632C/WR602C