Preparation
1. Connect each equipment according to the connection diagram in Section 2-1-1.
2. Turn on the power of each equipment and wait until the image is displayed on the video monitor.
3. Start the SNC toolbox and check that the serial number of this unit is displayed correctly.
n
If it is not displayed, click the [Search] button.
[Search] button
Upgrade
1. Click the information display portion of this unit, then click the [Network] button.
The Device Account screen is displayed.
2-8 (E)
[Network] button
Serial number
Information is displayed
for each model.
Double-click this portion.
Administrator name and
Administrator password
[OK] button
SNC-WR632C/WR602C