Sony SNC-WR632C Service Manual page 47

6. Click the [Browse] button, select the latest firmware, and then click the [Start|Upgrading] button.
The progress status is displayed in the Progress column. Wait until the upgrade is completed.
V M
7. After the completion of the upgrade, perform the procedure from step 4 again to perform the firmware
version upgrade.
n
This unit has a backup of firmware in the internal memory in preparation for an unexpected error.
This backup portion is not updated to the latest firmware by performing the version upgrade only
once. Therefore, be sure to perform the version upgrade twice with the latest firmware.
8. After the completion of the version upgrade, check that the MAC address, serial number and firm-
ware version displayed in the SNC toolbox are correct.
Mac address
SNC-WR632C/WR602C
M
Progress column
Serial number (Serial No.)
Firmware version (Version No.)
2-11 (E)