Sony SNC-WR632C Service Manual page 33

14. Remove the two screws, then remove the slip ring assembly (G6).
15. Remove the two screws, then remove the PAN shaft assembly and timing belt.
16. Remove the three screws, then remove the PAN pulley.
PSW2.6 6
PAN pulley
PAN shaft
assembly
SNC-WR632C/WR602C
TILT chassis
Slip ring assembly (G6)
PSW2.6
Hole
TILT chassis
Boss
6
PSW2.6 6
Timing belt
PAN shaft assembly
1-29 (E)