Table of Contents
Advertisement
2. Type "admin" in the Administrator name and Administrator password respectively, and then click the
[OK] button.
The Network Setting screen is displayed.
3. Check the radio button of "Use the following IP address", type the IP address and Subnet mask, and
then click the [OK] button.
. IP address:
192.168.0.100
. Subnet mask: 255.255.255.0
When the setting is normally completed, the Information screen is displayed.
If an error is displayed, check the connection of the LAN cable between this unit and PC, and then
perform the procedure from step 1 again.
SNC-WR632C/WR602C
[OK] button
Check the radio button.
IP address and Subnet mask
[OK] button
2-9 (E)
Hide quick links:
Advertisement
Table of Contents
