Sony SNC-WR632C Service Manual page 54

A
Is the VBS signal output from
CN804 on the TM-61 board?
No
Is there any problem with the
connection between CN704 on
the IF-1232 board and CN105
on the SY-416 board?
No
Replace the SY-416 board.
(Refer to Section 1-4-6.)
B
Is the video signal input to
pins 5 to 7 of CN105 on the
SY-416 board?
Yes
Replace the SY-416 board.
(Refer to Section 1-4-6.)
3-6 (E)
Is there any problem with the
Yes
supplied video connection
cable (BNC)?
No
Is the appropriate TV signal
selected in the camera setting?
(Are the NTSC and PAL output
settings correct?)
No
Switch the video output system
correctly.
Yes
Connect correctly.
Connect CN103 on the MD-151
No
board with CN105 on the SY-416
board.
7 pin:
Component Y signal
Yes
Replace the video connection
cable (BNC).
Yes
Replace the SY-416 board.
(Refer to Section 1-4-6.)
For the camera setting, refer to the User's Guide.
tri-level sync signal
SNC-WR632C/WR602C