Honda GX270H Manual page 129

62Z7B000.book 2 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
MUFFLER
MUFFLER REMOVAL/INSTALLATION
MUFFLER
The muffler becomes very hot during operation and
remains hot for a while after stopping the engine.
Be careful not to touch the muffler while it is hot.
Allow it to cool before proceeding.
SOLID PROTECTOR TYPE
MUFFLER PROTECTOR
TAPPING SCREW
(6 x 10 mm)
MUFFLER
MUFFLER GASKET
(If equipped)
MUFFLER
GASKET
EXHAUST
(If equipped)
PIPE
EXHAUST PIPE
PROTECTOR
(If equipped)
BOLT (6 x 12 mm)
NUT (8 mm)
24 N·m (2.4 kgf·m, 18 lbf·ft)
12-2
TAPPING SCREW
(5 x 8 mm) (4)
TAPPING SCREW
(4 x 6 mm) (3)
(If equipped)
MUFFLER CAP
(If equipped)
NUT (8 mm) (2)
24 N·m (2.4 kgf·m, 18 lbf·ft)
SPARK ARRESTER (If equipped)
CLEANING:
Before installing, clean the spark arrester.
GX270H:
TAPPING SCREW
(4 x 6 mm)
GX390H1:
TAPPING SCREW
(5 x 8 mm)
EXHAUST
PIPE GASKET