Honda GX270H Manual page 81

62Z7B000.book 18 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
FUEL SYSTEM
CHOKE SET REPLACEMENT
Remove the carburetor (page 6-9).
Pull out the choke valve plate [1].
Remove the choke shaft [2] and install a new choke
shaft.
Insert a new choke valve plate into the slit [3] of the
choke shaft.
Be sure the choke shaft is in the position between the
projections [4] of the choke valve plate.
CYLINDER STUD BOLT
REPLACEMENT
Thread two nuts onto the stud bolt and tighten them
together, and then use a wrench to turn the stud bolt
out.
Install new stud bolts.
SPECIFIED LENGTH
GX270H
8 x 98 mm:
8 x 123 mm:
GX390H1
8 x 106 mm:
8 x 131.5 mm:
6-18
82 mm (3.23 in)
107 mm (4.21 in)
90.0 mm (3.54 in)
115.5 mm (4.55 in)
[2]
[3]
[2]
[4]
[4]
[1]
[1]