Assembly - Honda GX270H Manual

62Z7B000.book 5 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead

ASSEMBLY

Hook the outer hook [1] of the recoil starter spring [2] to
the groove [3] in the recoil starter reel [4], and install the
spring by winding it.
Check the recoil starter rope [1] and replace it if it is
frayed or worn.
Pass the rope through the hole [2] in the reel [3] and
then tie the rope as shown.
Wind
counterclockwise as shown and hook it to the notch [4]
in the reel.
Pass the rope [1] through hole [2] of the recoil starter
case [3] and starter grip [4] and then tie the rope as
shown.
• Wear gloves and eye protection.
• During reassembly, take care not to allow the
spring to come out.
the rope onto the reel
[2]
[2]
[3]
1-3/4 turns
[3]
STARTING SYSTEM
[3] [1]
[4]
[4]
[1]
[2]
[1]
[4]
10-5