Honda GX270H Manual page 70

62Z7B000.book 7 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
OIL BATH TYPE:
BREATHER TUBE
INSTALLATION:
After installing the air cleaner elbow,
insert the breather tube to the hole
of the cylinder head cover as shown.
BREATHER TUBE
HIGH-TENSION CORD
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
WING NUT
AIR CLEANER CAP
AIR CLEANER COVER
CLEANER OIL PAN
WASHER BOLT
(6 x 22 mm)
COLLAR
AIR CLEANER
COLLAR (2)
FLANGE NUT (6 mm) (2)
9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
FUEL SYSTEM
WING NUT
AIR CLEANER CAP
GX270H:
AIR CLEANER
COVER
AIR CLEANER
ELEMENT
AIR CLEANER
GRID
CLEANER OIL
PAN
AIR CLEANER
ELBOW SEAL
AIR CLEANER
ELBOW SEAL
AIR CLEANER ELBOW
REMOVAL/INSTALLATION:
Remove and install the air cleaner
elbow with the fuel valve lever in the
OFF position and the choke lever in the
CLOSE position.
Before installation, clean the inside of
the air cleaner elbow.
6-7