Honda GX270H Manual page 112

62Z7B000.book 7 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
With the slack in the rope, turn the recoil starter reel [1]
counterclockwise until the notch [2] align with the hole
[3], then further turn it 3 turns to preload the recoil
starter spring.
Remove the slack by pulling the rope [1], unhook it from
the notch [2], and release the rope to wind in the reel
[3].
Pull the rope out of the reel [1] completely and check
that the knot [2] of the rope comes to the hole [3] in the
case.
If the reel can be further turned from this position, the
assembly is normal.
If the knot does not come to the hole, the recoil starter
spring is excessively preloaded.
Pull the starter grip [1] several times to inspect that the
ratchets [2] are operated properly (the ratchet ends
come out from the ratchet guide [3]).
STARTING SYSTEM
[3]
[1]
[2]
[3]
[2]
[2]
[1]
[3] [2]
[1]
[2]
[1]
[3]
10-7