Honda GX270H Manual page 67

62Z7B000.book 4 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
FUEL SYSTEM
AIR CLEANER REMOVAL/
INSTALLATION
DUAL/DUAL SILENT TYPE:
BREATHER TUBE
INSTALLATION:
After installing the air cleaner elbow,
insert the breather tube to the hole
of the cylinder head cover as shown.
BREATHER TUBE
HIGH-TENSION CORD
SLANT OUTSIDE
CARBURETOR SPACER
(If equipped)
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
6-4
WING NUT
AIR CLEANER
ELEMENT (PAPER)
WASHER BOLT (6 x 22 mm)
COLLAR
AIR CLEANER
COLLAR (2)
NUT
AIR CLEANER
COVER
GROMMET
AIR CLEANER
ELEMENT (FOAM)
NOISE SILENCER
GX270H:
AIR CLEANER
ELBOW SEAL
AIR CLEANER ELBOW
REMOVAL/
INSTALLATION:
Remove and install the air
cleaner elbow with the
fuel valve lever in the OFF
position and the choke
lever in the CLOSE
position.
Before installation, clean
the inside of the air
cleaner elbow.
FLANGE NUT (6 mm) (2)
9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)