Honda GX270H Manual page 174

62Z7B000.book 31 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
P.T.O. SHAFT BEARING (6206)
Drive out the radial ball bearing [1].
Drive a new bearing [2] until it is fully seated on the end
using the special tools.
TOOLS:
Attachment, 62 x 64 mm [3]
Pilot, 30 mm [4]
Driver handle [5]
P.T.O. SHAFT OIL SEAL (30 x 46 x 8
mm)
Remove the oil seal from the crankcase cover.
Drive a new oil seal [1] in the position as shown using
the special tools.
TOOLS:
Attachment, 45 x 50 mm [2]
Driver handle [3]
Apply grease to the lip of a oil seal.
07947-6340400
07746-0040700
07749-0010000
[5]
[3]
[2]
07946-6920100
07749-0010000
2.0 mm (0.08 in)
CRANKCASE
[1]
[2]
[4]
[3]
[1]
(Lips)
14-31