Honda GX270H Manual page 71

62Z7B000.book 8 ページ ２０１２年９月２７日 木曜日 午前１０時２１分
dummyhead dummyhead
FUEL SYSTEM
SEMI DRY TYPE:
BREATHER TUBE
INSTALLATION:
After installing the air cleaner elbow,
insert the breather tube to the hole
of the cylinder head cover as shown.
BREATHER TUBE
HIGH-TENSION CORD
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
6-8
WASHER BOLT (6 x 22 mm)
COLLAR
AIR CLEANER
COLLAR (2)
AIR CLEANER ELBOW NUT (6 mm) (2)
9.0 N·m (0.9 kgf·m, 6.6 lbf·ft)
WING NUT
AIR CLEANER CAP
AIR CLEANER COVER
AIR CLEANER
ELEMENT
AIR CLEANER GRID
AIR CLEANER ELBOW
REMOVAL/
INSTALLATION:
Remove and install the air
cleaner elbow with the fuel
valve lever in the OFF
position and the choke
lever in the CLOSE
position.
Before installation, clean
the inside of the air cleaner
elbow.