Datamax M-Class Mark II Operator's Manual page 33

SENSOR
CALI BRATI ON
PERFORM
CALI BRATI ON
ADVANCED ENTRY
PAPER SENSOR
LEVEL
REFL PAPER
LEVEL
GAP SENSOR
LEVEL
MARK SENSOR
LEVEL
EMPTY SENSOR
LEVEL
TRAN SENSOR
GAI N
REFL SENSOR
GAI N
PRI NTHEAD
CLEANI NG
CLEAN HEAD
SCHEDULE
CLEAN HEAD
COUNTER
RESET COUNTER
CLEAN HEAD NOW
Ch a pt e r 4 – M e n u Syst e m
Select s t he m edia sensor calibrat ion m et hod, where:
Set s t he values via int ernal print er calculat ions, as described in t he STANDARD
CALI BRATI ON procedure.
Set s t he values via m anual ent ry ( t ypically for hard t o calibrat e label st ocks) , as
described in t he ADVANCED ENTRY CALI BRATI ON where:
Est ablishes t he t hreshold for t he paper value ( 0 - 255) , where 170 is t he default
set t ing.
Est ablishes t he t hreshold for t he reflect ive value ( 0 - 255) , where 170 is t he
default set t ing.
Est ablishes t he t hreshold for t he gap value ( 0 - 255) , where 040 is t he default
set t ing.
Est ablishes t he t hreshold for t he m ark value ( 0 - 255) , where 040 is t he default
set t ing.
Est ablishes t he t hreshold for t he em pt y value ( 0 - 255) , where 000 is t he default
set t ing.
Est ablishes t he sensit ivit y of t he t ransm issive sensor ( 0 - 31) , where 15 is t he
default set t ing.
Est ablishes t he sensit ivit y of t he reflect ive sensor ( 0 - 31) , where 15 is t he
default set t ing.
Cont rols t he aut om at ic cleaning alert and funct ion, where:
Specifies t he inch ( or cent im et er) count at which t o clean t he print head, and if
exceeded t hree t im es, declare a Head Cleaning Fault . ( Not e t hat t he specified
count [ 0 - 200 inches] will be m ult iplied by one t housand, and t hat zero [ t he
default set t ing] will disable t he funct ion.)
I ndicat es t he num ber of inches ( or cent im et ers) since a cleaning was last
init iat ed.
Reset s t he Clean Head Count er t o zero t o rest art t he Clean Head Schedule.
I nit iat es t he cleaning process and reset s t he Clean Head Count er.
2 7