Reset Menu - Epson EB-L30002U User Manual

List of Functions
Submenu
Voltage Warning Info
Temp Warning Info
Power On/Off History

Reset Menu

Submenu
Resets all names and settings saved in Memory, Lens Position,
Reset All Memo‐
and Geometry Correction.
ries
s "Memory Function"
Function
Displays a warning regarding the power
voltage.
Displays a high temperature warning. When
you select Detail when a Warning or Error is
displayed, you can check detailed logs for
before and after the error was detected.
Displays the power on/off logs.
Function
p.109
Submenu
Refresh Mode Make settings related to the Refresh Mode.
 Timer: Select when to run Refresh Mode.
 Messages: Select whether or not to display messages during
refresh operations.
 Start: Removes any afterimages (screen burn-in) that remain
in the projected image. The projector turns off once the set
time has elapsed. When you press any button on the remote
control, a message is displayed asking if you want to continue
using Refresh Mode. When you press any button on the
control panel, Refresh Mode is canceled.
Make settings related to Light Source Calibration.
Light Source Cal‐
ibration
When performing Light Source Calibration, the difference
between the white balance and the brightness level for the light
source is corrected. We recommend running this function
periodically.
 Run Now: Starts Light Source Calibration. This cannot be
started in the following cases.
- Within 20 minutes of turning on the projector.
- If the surrounding temperature gets too high, and the
brightness has been automatically dimmed.
 Run Periodically: When this is set to On, Light Source
Calibration is performed every 100 hours of use. When Off is
selected to maintain the projected image that has been adjusted
using Multi-Projection, perform corrections using Run Now
or set the scheduling function to perform Light Source
Calibration periodically.
 Schedule Settings: Displays the schedule settings screen. Set
Light Source Calibration to run periodically.
 Last Run: Displays the last date and time Light Source
Calibration was performed.
163
Function