Configuration Menu Operations
This section explains how to use the Configuration menu.
Although steps are explained using the remote control as an example, you
can perform the same operations from the control panel. Check the guide
under the menu for the available buttons and their operations.
a
If you operate the menus while projecting, the last menu screen you
used is displayed. Hold down the [Esc] button to display the top level
menu screen. When you turn off the projector, menu operations
return to the opening screen.
a
Display the Configuration menu screen.
b
Select a top menu item.
c
Select a submenu item.
d
Change settings.
a
When "[Default]: Reset" is displayed on the guide under the
menu, pressing the [Default] button on the remote control
returns the settings being adjusted to their default values.
e
Press the [Menu] button to finish making settings.
137