Part Names And Functions; Front/Top - Epson EB-L30002U User Manual

Part Names and Functions

Unless otherwise mentioned, the illustrations used in this guide show the
projector with the lens unit (ELPLM12) installed.

Front/Top

Here, the protective cap is installed.
Name
A
Use the handles on the left and right when carrying the
Handles
projector.
B
Install this when storing or transporting the projector.
Protective cap
Function
Name
C
Lens replacement Remove when attaching or removing the lens.
cover
s "Removing and Attaching the Projector Lens Unit"
p.30
D
Images are projected through here.
Projection lens
E
This camera scans the image when correcting the
Built-in camera
projected image automatically.
F
Receives signals from the remote control.
Remote receiver
Function
Caution
When moving the projector, do not hold the lens
replacement cover. The lens replacement cover
may be removed and the projector may fall, which
could cause an injury.
Warning
Do not look into the lens while projecting. This
could cause damage to eyesight due to the power‐
ful light emitted.
Caution
When shifting the lens, do not put your hands near
the lens unit. Your fingers may get caught between
the lens unit and the projector, and cause an in‐
jury.
Attention
Exposing the camera to bright light may
cause a malfunction to occur.
17