Epson EB-L30002U User Manual page 142

List of Functions
Submenu
White Balance Color Temp.: You can adjust the overall tint of the image within
a range from 3200K to 10000K. The image is tinted blue when a
high value is selected and tinted red when a low value is selected.
When Color Mode is set to Dynamic, the set Color Temp. may
differ from the actual Color Temp. of the light from the projector.
Use this menu as a guide.
G-M Correction: The color tone is tinted red when set to a
negative value, and tinted green when set to a positive value.
Offset R/Offset G/Offset B/Gain R/Gain G/Gain B: You can
adjust the offset and gain of each color R (red), G (green), and B
(blue) individually.
Function Submenu
Image Enhance‐ You can adjust the image resolution.
ment
s "Adjusting Image Resolution (Image Enhancement)"
4K Enhancement: You can project at a doubled resolution.
Image Preset Mode: You can select the optimal setting according
to the projected image from five presets prepared in advance.
Frame Interpolation: You can play fast moving images
smoothly by producing intermediate frames between the
original frames.
Deinterlacing: (Only when the input signal is 480i, 576i, or
1080i) You can convert interlace signals into progressive signals.
(IP conversion)
Off is ideal for images with a large amount of movement, Video
for general video images, and Film/Auto for movie films,
computer graphics, and animation.
Noise Reduction: You can smooth out the roughness in
progressive images.
MPEG Noise Reduction: You can reduce dot and block noise
that occurs in outlines when projecting MPEG movies.
Super-resolution: To display a crisp image, you can reduce the
blurring that is created on the edge when the resolution of the
image signal is scaled up and projected.
Detail Enhancement: You can enhance the contrast of details in
an image.
Reset: You can reset all adjustment values for Image
Enhancement to their default values.
You can make adjustments by choosing the following items.
Advanced
Gamma: You can adjust the coloring by selecting one of the
gamma correction values, or referring to the projected graph.
RGBCMY: You can adjust the hue, saturation, and brightness of
each color R (red), G (green), B (blue), C (cyan), M (magenta), Y
(yellow) individually.
142
Function
p.81