Epson EB-L30002U User Manual page 150

List of Functions
Submenu
HDBaseT Control Communications: (This cannot be set when
Extron XTP is set to On.) When set to On, Ethernet
communication, serial communication, and the wired
remote control through the HDBaseT Transmitter connected
to the HDBaseT port are all enabled.
Extron XTP: Set to On when you connect the Extron XTP
transmitter or switcher to the HDBaseT port. See the
following Extron Web site for more details on the XTP
system.
http://www.extron.com/
a
Function
 When Control Communications or Ex‐
tron XTP is set to On, Standby Mode is
automatically set to Communication On.
 When Control Communications or Ex‐
tron XTP is On, the projector's LAN
port, RS-232 port, and Remote port are
disabled.
 When Extron XTP is set to On, the fan
may rotate in standby mode but this is
not abnormal.
Submenu
SDI Settings Set the signal from the 3G/HD/SD SDI port.
SDI: When Single (Auto) is selected as the Link Type, the
payload ID for the input signal is read and the image is
displayed automatically. When you know the type of input
signal, select Single (Manual) and set the same signal as the
input signal used in Manual Settings to fix it to the same
signal as the input signal.
For Manual Settings, set the following items, select Set, and
then press the [
Manual Settings are supported.
 SDI Type: Select from the SDI types displayed.
 Resolution: Select from the resolutions displayed.
 Refresh Rate: Select from the refresh rates displayed.
 Color Sampling: Select from the color samplings
displayed.
 Color Depth: Select from the color depths displayed.
Color Calibration: Enables/disables the color calibration
Color Calibra‐
function.
tion
Start Auto Adjustment: Automatically adjusts the color
tone for the whole screen.
s "Color Calibration"
Undo: Undoes the auto adjustment.
Redo: Redoes the auto adjustment.
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity"
Reset: You can reset all adjustment values for Color
Calibration to their default values.
Function
] button. Not all combinations of items in
p.224
p.226
150