Installing the Projector
a
If the lever has been secured with the screw, loosen the screw
first.
d
Pull the lens unit straight out.
Installation Settings
Changing the direction of the image (projection mode)
You can change the direction of the image using Projection mode from the
Configuration menu.
Extended - Projection
p.147
s
When Front is the standard, the image directions for each projection mode
are as follows.
Front (default)
Rear
a
You can change the setting as follows by pressing down the [Shutter]
button on the remote control for about five seconds.
FrontWFront/Ceiling
RearWRear/Ceiling
To rotate the menu display, set OSD Rotation in the Configuration
menu.
s Extended - Display - OSD Rotation
Screen Settings
Set the Screen Type according to the aspect ratio of the screen being used.
The area where the image is displayed matches the shape of the screen.
34
Front/Ceiling
Rear/Ceiling
p.147