Table of Contents
Advertisement
Getting Started: Communication between a CPU 416-2 PCI and an S7-400
Procedure
1. To communicate the station name to the PC:
2. Open the Station Configuration Editor by clicking the
Result: the Station Configuration Editor is displayed.
3. Click on Station Name.
4. Enter "Box PC 840" as the station name, and click OK.
Adding CP 1613
To add a CP 1613 to the station, proceed as follows:
1. Select an available slot in the Station Configuration Editor.
2. Click the Add button.
Result: a list of inserted CPs and CPs not yet added to the station is
displayed.
3. Select the CP 1613 in the list.
4. Confirm by clicking OK twice.
Result: the component properties are displayed.
5. Click OK. You specify the properties of the CP 1613 later in the STEP 7
Hardware Configuration application.
6. Click OK to exit the Station Configuration Editor.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
symbol in the taskbar.
91
Advertisement
Table of Contents
