Table of Contents
Advertisement
6. Activate the RUN button on the controller panel.
The STOP LED display goes out and the RUN LED display lights up. The CPU
is now in RUN mode.
7. Activate the STOP button on the controller panel.
The RUN LED display goes out and the STOP LED display lights up. The CPU
is now in STOP mode.
8. If you want to test the internal supply through the PCI, you can remove the
external power supply and check whether the CPU 41x-2 PCI continues to
operate.
9. Connect the CPU 41x-2 PCI step-by-step to the remaining components.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Getting Started
55
Advertisement
Table of Contents
