Closing The Controller Panel; Customizing And Security Options; Customize Command (Cpu Menu) - Siemens SIMATIC 6ES7673-2CC40-0YA0 Hardware Installation And Operating Manual

4.8

Closing the Controller Panel

Select the File > Exit menu command to close the controller panel.
Note: Closing the controller panel does not turn off the controller or affect the
operating mode.
4.9

Customizing and Security Options

4.9.1

Customize Command (CPU Menu)

To open the Customize dialog box, select the CPU > Options > Customize menu
command. The tabs of the dialog box allow you to customize the controller panel
as follows:
4.9.1.1 General
Select Always On Top to display the controller panel on top of all other open
windows.
4.9.1.2 Language
You can change the display language for the controller panel menus and online
help.
To change the display language, follow these steps:
1. To open the Customize dialog box, select the CPU > Options > Customize
menu command.
2. In the Customize dialog, select the Language tab.
3. Select the language for the controller panel.
4. Click Apply to change the language.
5. Click OK to close the Customize dialog.
The controller panel automatically changes to the selected language.
4.9.1.3 Autoload
WinAC Slot 41x features the Autoload function, which defines how WinAC Slot 41x
reacts to a Power Up and Power Down of the PC. This feature is described in
"Setting the Autoload Feature".
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Operating the Controller - CPU 41x-2 PCI
71