Table of Contents
Advertisement
Standards
The CPU 41x-2 PCI satisfies the requirements and criteria of IEC 61131-2.
Relationship to Other Manuals
This manual describes how the CPU 412-2 PCI and CPU 416-2 PCI differ from the
CPUs of the S7-400 family. The following documents are also needed:
•
STEP 7 - Programming with STEP 7. This manual provides basic information
on designing and programming a WinAC Slot STEP 7 user program.
•
STEP 7 - System and Standard Functions for S7-300 and S7-400. This manual
provides you with descriptions of the system functions, organization blocks,
and loadable standard functions.
•
STEP 7 - Working with STEP 7. This manual explains the usage and the
functions of the STEP 7 automation software. This manual provides you with
an overview of the procedures used to configure WinAC Slot and to develop
STEP 7 user programs.
•
SIMATIC NET - Commissioning PC Stations This manual supports you when
commissioning your SIMATIC NET PC modules in a PC station. All SIMATIC
NET software tools and their operation are described (available once SIMATIC
NET is installed).
•
SIMATIC NET - Industrial Communication with PG/PC, Parts 1 and 2. This
manual helps you with setting up industrial communications over PROFIBUS
and Industrial Ethernet communications networks (available if you install
SIMATIC NET)
•
SIMATIC S7-400 Programmable Controllers CPU Specifications Reference
Manual. This manual describes the operation of the S7-400 with PROFIBUS
DP, the memory concept, and the estart methods.
•
SIMATIC S7-400 Programmable Controllers Hardware and Installation
Installation Manual. This manual describes the networking and commissioning
(resetting the CPU with the mode selector; warm restart and hot restart with
mode selector).
•
SIMATIC S7-400 Programmable Controllers Module Specifications Reference
Manual. This manual provides a description of the RS 485 repeater.
•
SIMATIC S7-400 Instruction List. This manual provides you with a complete list
of instructions that are applicable to the WinAC Slot PLCs as well as
information on addressing and performance data. The instruction list is
included as a PDF file in this documentation package. The CPU 412-2 PCI
corresponds to the specifications for the CPU 412-2 (6ES7 412-2XG04-0AB0),
and the CPU 416-2 PCI to those for CPU 416-2 (6ES7 416-2XK04-0AB0).
The SIMATIC manuals can be accessed on the PC with the installed SIMATIC
software using the Start > Simatic > Documentation menu command.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Preface
5
Advertisement
Table of Contents
