Operating the Controller - CPU 41x-2 PCI
The Autoload dialog is displayed.
Use the following procedure to enable the Autoload feature:
1. Select the CPU > Options > Customize menu command to display the
Customize dialog.
2. In the Customize dialog, select the Autoload tab.
3. Select an archive file (.wld file) to load on restart.
4. Select the operating mode to set for the controller on restart.
5. Click OK to confirm your configuration. This closes the dialog.
60
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Windows Automation Center, WinAC Slot Version 4.0