Table of Contents
Advertisement
STEP 7 Operations and Components
5.2.1
Accessing Operational Parameters
To configure any of these operational parameters in STEP 7, open the
SIMATIC Manager and follow these steps:
1. In the SIMATIC Manager, select the PC station.
2. Click the Configuration icon.
3. Right-click the controller in the station window and select Object Properties.
4. Click the tab with the name of the parameter that you want to configure (such
as Cyclic Interrupt) and enter the appropriate values in the dialog.
5. Click OK to confirm your configuration.
Refer to your STEP 7 documentation for specific information about configuring the
controller properties and the operational parameters.
78
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
Windows Automation Center, WinAC Slot Version 4.0
Advertisement
Table of Contents
