Table of Contents
Advertisement
Getting Started: Connecting the Controller to the SIMATIC NET OPC Server
6. Click OK to define an item for M0_0.
7. Select the MX0.0 entry and click the Add arrow (-->) to enter the following
syntax that defines a connection for MX0.0:
S7:[OPC_1]MX0.0
8. Select the entry (S7:[OPC_1]MX0.0) and click OK to add the connection for
MX0.0 to Group1.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
117
Advertisement
Table of Contents
