Table of Contents
Advertisement
Getting Started: Connecting the Controller to the SIMATIC NET OPC Server
Adding the OPC Server to the Hardware Configuration
1. Expand the User Application folder in the Hardware Catalog.
2. Expand the OPC Server folder and select the following component:
3. SW V6.3
4. Drag and drop the SW V6.3 component to the same index as configured in the
Station Configuration Editor. (For this example, the OPC server is configured
for Index 1.)
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
107
Advertisement
Table of Contents
