Siemens SIMATIC 6ES7673-2CC40-0YA0 Hardware Installation And Operating Manual page 168

Use of Shared Memory Interface (Dual Port RAM)
WinAC Slot 412/416
PC Software CD
V3.4
V4.0
Configurations of WinAC Slot 412/416 V3.2 to V3.4 can be transferred to WinAC
Slot 412/416 V4.0 without restrictions.
To utilize the new functions of the WinAC Slot 412/416 V4.0, the new firmware
version CPU 41x-2 PCI, V4.0 must be transferred from the HW catalog.
Product Version Compatibility and Supported Operating Systems
The table shows the viable combinations of WinAC Slot PC software versions and
firmware versions and Microsoft operating systems.
Firmware
Version of
WinAC Slot Software CD
Module
V3.4 V3.3
V3.4 V3.4
V3.4 V4.0
V4.0 V4.0
The WinAC Slot 412/416 V3.3, V3.4, and V 4.0 product versions are fully backward
compatible. If you want to use Microsoft Windows NT4 Workstation, you can use
SIMATIC WinAC Slot 412/416 V3.2, which is still available.
Windows Automation Center, WinAC Slot Version 4.0
Hardware Installation and Operating Manual, Edition 02/2006, A5E00273194-02
WinAC Slot SMX
V3.3
V3.3
WinAC Slot Microsoft
412/416 PC Windows NT4
Workstation
No
No
No
No
V4.1
V4.1
Microsoft
Windows 2000
Professional
SP6 SP3
Yes
Yes
Yes
Yes
Reference Information
WinAC ODK
Microsoft
Windows XP
Professional
SP1
Yes
Yes
Yes
Yes
167