2
Installing 8890 GC Columns
To Install a Capillary Column in the GC/MSD Interface Using the Self-Tightening Column Nut
15 Gently check the alignment of the ion source and the interface tip seal.
16 You can align the ion source and interface tip seal by wiggling the side plate
17 Close the analyzer chamber door. (See
46
When the ion source is aligned correctly, the analyzer chamber can be
closed all the way with no resistance except the spring tension from the
interface tip seal.
on its hinge. If the door still will not close, contact your Agilent Technologies
service representative.
page 220.)
"To Close the Analyzer Chamber"
5977B Series MSD Operating Manual
on