Initial Switch-On; Navigating Around The Displays; Choosing Your Help Language - Agilent Technologies ProBER 2 User's Reference Manual

Initial Switch-on

ProBER 2 is supplied ready to use straight from the box. There is no need to charge the battery. Use the
instrument until the battery is completely exhausted before giving it its first charge.
When you first switch on ProBER 2, you may need to adjust the display contrast by holding down the
display backlight key
toggles the backlight on and off.

Navigating around the displays

Before using ProBER 2, you'll need to know how to select
and change settings. Here's how to do that.
1. Move within the display area by using the cursor control
keys , , and
the display quickly by pressing
2. In each of the display areas, the field that can be changed
(the active field) is marked by a "highlighted cursor". In
the example shown here, it's
3. Alternative selections/modes for the active field are
accessed using the softkeys below the display.
4. When a field has more than five choices, a softkey
labelled is provided. Press it to reveal more
More
choices.

Choosing your HELP Language

The HELP messages displayed on the screen can be provided
in English and one other language. The other language
depends on which ProBER 2 option you have ordered.
1. Choose ,
MENU
to obtain the local language display, as
Inst. Config
shown.
2. Move the cursor down to Language and choose the
language required from the menu.
Getting Started
. This cycles the contrast through its setting range. A quick press of the same key
. Return the cursor to the top of
.
MENU
.
Tx + Rx
, , ,
More Other
then
More
1-3