Table of Contents
Advertisement
Using "Other" Features
Running Self Test
Run Quick Tests (15 Seconds)
1 Choose
Quick Tests
2 Connect the TRANSMIT 75Ω port to the RECEIVE 75Ω port.
3 Press
START/STOP
After a few seconds an Overall Status PASS or FAIL message will be displayed.
Run Auto Tests (5 minutes)
1 Choose
Auto Tests
2 Connect the TRANSMIT 75Ω port to the RECEIVE 75Ω port.
3 Press
START/STOP
While the tests are running the Test Name, Subtest Number and Test Status are
updated on the display to show the progress of the test.
If a failure is detected the test will halt and Overall Status FAIL will be
displayed.
At the completion of the test without failure Overall Status PASS will be
displayed.
Fail Number
1xxxx
CPU
2xxxx
Real Time Clock
3xxxx
Line Level
4xxxx
Clock
Run Manual Tests
1 Choose
Manual Tests
chosen.
8-12
.
to run the Self Test.
,
All Tests
.
to run the Self Test.
Description
Fail Number
5xxxx
6xxxx
7xxxx
8xxxx
, then follow the on-screen instructions for the test
Description
BER
Pulse Mask
Jitter
Delay
Advertisement
Table of Contents
