Table of Contents
Advertisement
WA RN IN G
Installation
Initial Inspection
TO AVOID HAZARDOUS ELECTRICAL SHOCK, DO NOT PERFORM
ELECTRICAL TESTS WHEN THERE ARE SIGNS OF SHIPPING
DAMAGE TO ANY PORTION OF THE OUTER ENCLOSURE (COVERS,
PANELS, METERS).
Inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, it should be kept until the contents of the shipment have been
checked for completeness and the instrument has been checked both mechanically
and electrically. Procedures for checking electrical operation are given in the
Service Manual. If the contents of the shipment are incomplete or if there is
mechanical damage or defect, notify the nearest Agilent office. If the instrument
does not pass the electrical performance tests given in the Service Manual, notify the
nearest Agilent office. If the shipping container is also damaged, or the cushioning
material shows signs of stress, notify the carrier as well as the nearest Agilent office.
Keep the shipping materials for the carrier's inspection. The Agilent office will
arrange for repair or replacement without waiting for claim settlement.
A list of Agilent Sales and Service Offices is available through the Agilent Website
at URL:
http://www.tm.agilent.com/tmo/TMTop/English/index.html
Operating Environment
This instrument is designed for Indoor use only.
DO NOT operate the product in an explosive atmosphere or in the presence of
flammable gasses or fumes.
This instrument may be operated in environments within the following limits:
o
Temperature:
0
o
0
Altitude:
Up to 3050 m (10,000 ft)
2-2
o
C to +50
C (operating);
o
C to +40
C (charging).
Advertisement
Table of Contents
