Table of Contents
Advertisement
Description:
HOW TO:
NOT E
Making Measurements
Monitoring Spare Bits
Monitoring Spare Bits
ProBER 2 displays the Synchronization Status Message in the chosen Sa Bit and the
value of all the Sa Bits. For more information, see "Setting Spare Bits" on page 5-5.
1 Choose
,
Results
MENU
Bits Monitor display.
2 Choose the Sa Bit to be monitored for Synchronization Status Messages.
Each Sa Bit can be chosen in turn without affecting the measurement.
The Spare Bits Monitor display is available only when a PCM30CRC or PCM31CRC
frame structure is chosen on the Tx/Rx setup.
,
,
,
MORE
Sa Bit Monitor
to obtain the Spare
6-21
Advertisement
Table of Contents
