Table of Contents
Advertisement
Description:
NOT E
HOW TO:
Setting the Interfaces
Setting Transmit and Receive Interfaces
Setting Transmit and Receive Interfaces
ProBER 2 can be configured to:
Transmit and Receive simultaneously,
Operate in Receive Only mode or
Operate in Thru Mode.
Thru Mode allows non-intrusive monitoring of live traffic.
Receive Only mode extends the time between battery charges.
1 Choose
TX/RX Setup
MENU
display, as shown.
2 Press
then choose your operating mode from
.
Thru Mode
If
is chosen the Transmit and Receive settings can be coupled together
Tx + Rx
or independent of each other:
Tx = Rx
- any change on either Tx or Rx will automatically occur on the other.
Tx ≠ Rx
- changes to Tx and Rx settings must be made independently of each
other.
If
is chosen only the Receive settings are available.
Rx Only
If
is chosen the received signal can be:
Thru Mode
- returned to the network without being modified.
Transparent
- modified before return to the network
Overwrite
to obtain the Transmit and Receive interface
Tx + Rx
,
or
Rx Only
4-3
Advertisement
Table of Contents
