Table of Contents
Advertisement
Setting the Date and Time
When results are recorded, it is useful to have certain events
time-stamped, for example, Alarms, Error Seconds, etc.
Here's how to set the date and clock:
1. Choose
,
MENU
to obtain the Time and Date display, as
Time/Date
shown.
2. Move the cursor to Date and enter the correct date using
,
,
,
EDIT
action your edits or press
3. Move the cursor to Time and enter the correct time, as
above.
Taking Care of your Battery
ProBER 2 uses a high-performance Nickel Metal Hydride
(NMH) rechargeable battery pack that may not be fully
charged when you receive the instrument. Whatever the state
of charge, use ProBER 2 until the battery is completely
exhausted before being given its first charge. This ensures
that the battery charge indicator is more accurate. Maximum
accuracy is obtained after the battery has been fully
discharged and recharged twice. Access the indicator by
choosing
,
MORE
MENU
takes a few minutes for the indicator to stabilize.
Charging your Battery
To recharge the battery, first fit the appropriate adapter
(supplied) to the charger, as shown. Normally the battery will
be fully charged after 5 hours.
Note that ProBER 2 can be used while the battery is charging.
Getting Started
,
,
,
More
Other
and
. Then press
to escape.
Cancel
,
,
Other
Battery Life
1-4
, then
More
to
ENTER
. It
Advertisement
Table of Contents
