Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface
of the access point and configure the basic and additional wireless networks.
In the General Settings section, the following parameters are available:
Parameter
Enable Wireless
Country
Wireless mode
Select channel
automatically
Figure 82. Basic settings of the wireless LAN.
To enable Wi-Fi connection, move the switch to the right.
To disable Wi-Fi connection, move the switch to the left.
The country you are in. Select a value from the drop-down list.
Operating mode of the wireless network of the access point. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
Move the switch to the right to let the access point itself choose the
channel with the least interference.
Page 92 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
