Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Destination port
Set source port
manually
Source port
Click the APPLY button.
To edit a rule for IP filtering, select the relevant line in the table. On the opened page, change the
needed parameters and click the APPLY button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
Ports
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Move the switch to the right to specify a port of the source IP
address manually. Upon that the Source port field is displayed.
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
). Also you can remove a rule on the editing page.
Page 145 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
