D-Link DAP-300P User Manual page 34

DAP-300P Wireless N300 PoE Access Point / Router
User Manual
6. Select the Use the following IP address radio button and enter the value
192.168.0.51 in the IP address field. The Subnet mask field will be filled in
automatically. Click the OK button.
Figure 21. The Internet Protocol Version 4 (TCP/IPv4) Properties window.
7. Click the Close button in the connection properties window.
8. To open the list of available wireless networks, select the icon of the wireless network
connection and click the Connect To button or left-click the network icon in the
notification area located on the right side of the taskbar.
Figure 22. The notification area of the taskbar.
Page 34 of 175
Installation and Connection