Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Connection of Multimedia Devices
This section is available if the Router or WISP Repeater mode was selected in the Initial
Configuration Wizard.
The Multimedia Devices Connection Wizard helps to configure the LAN port or available wireless
interfaces of the access point for connecting additional devices, for example, an IPTV set-top box or
IP phone. Contact your ISP to clarify if you need to configure DAP-300P in order to use these
devices.
!
Configuration of the LAN port is available only via Wi-Fi connection to DAP-300P .
To start the Wizard, on the Home page, select the Connection of Multimedia Devices section.
If you need to select a port or wireless interface in order to use an additional device, left-click the
relevant element in the LAN section (the selected element will be marked with a frame). Then click
the APPLY button.
Figure 55. The Multimedia Devices Connection Wizard. The simplified mode.
Page 64 of 175
Configuring via Web-based Interface
Advertisement
Table of Contents
