Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Mode of dynamic IP
address assignment
Start IP
End IP
Lease time
DNS relay
External DHCP server IP
Dynamic IP Addresses
An operating mode of the access point's DHCP server.
•
Disable: the access point's DHCP server is disabled, clients'
IP addresses are assigned manually.
•
DHCP server: the access point assigns IP addresses to
clients automatically in accordance with the specified
parameters. When this value is selected, the Start IP, End IP,
Lease time fields and the DNS relay switch are displayed
on the tab.
•
DHCP relay: an external DHCP server is used to assign IP
addresses to clients. When this value is selected, the External
DHCP server IP and Option 82 Remote ID fields are
displayed on the tab. For the Router and WISP Repeater
modes only.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Move the switch to the right so that the devices connected to the
access point obtain the address of the access point as the DNS server
address.
Move the switch to the left so that the devices connected to the
access point obtain the address transmitted by the ISP or specified
on the Advanced / DNS page as the DNS server address.
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
To specify several IP addresses, click the ADD button, and in the
line displayed, enter an IP address.
To remove the IP address, click the Delete icon ( ) in the line of
the address.
Page 74 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
